There are a few things to note here.
The thermal printer can only print at a temperature of 50 degrees Fahrenheit.
That is higher than most car air conditioners.
That means the printer will be a bit more difficult to work with than a normal printer, and it can be quite hot.
There are also a few safety concerns to keep in mind.
The printer can generate heat very quickly.
That’s why you’ll want to be very careful with the temperature of the printer itself.
You also need to keep the printer in an area that’s not touching other surfaces.
That way, the heat generated will not spread to the printer as it cools down.
This is especially important if you’re trying to print a large piece of paper.
It’s easier to print small pieces than it is to print large pieces.
It is, however, possible to print larger pieces.
We’ve seen a lot of 3D printed guns over the years.
But we haven’t had a lot more than a few dozen prototypes, and that’s only because the printers aren’t particularly durable.
If you’re interested in learning more about how to print guns, check out our video below.
Read or Share this story: http://usat.ly/1hQyJq5